2014-06-02 23:59
附件是UC1701的12864显示驱动芯片资料，用航顺芯片HK32F103驱动12864点阵液晶
2018-11-17 16:55
STM32驱动0.96寸OLED屏幕（四脚）1 注意事项2 如何利用STM32单片机驱动12864液晶屏2.1*基本配置*2.2 *0.96寸OLED端口含义*2.3
2021-08-09 07:47
stm32驱动LCD12864液晶屏驱动程序，亲测可行，复制直接能用！
2020-03-26 11:44
12864液晶串行操作程序代码分为12864.c文件、12864.h头文件、main.c文件，3个文件程序代码如下（1）lcd1
2022-02-17 06:59
不能肯定程序是否已经下载到单片机里面了，因为用自己画的板子“下载”之后放到开发板上去，只是亮了，没有文字。。。。各位大侠，能否指点一下....很纠结，眼看就要成功了，又被卡住了....我把图液晶部分的原理图附上了，我用的液晶是YB
2011-12-22 15:22
目录：12864液晶显示原理一、点阵LCD的显示原理二、12864点阵型LCD简介三、12864LCD的指令系统及时序四、128
2021-07-26 06:06
lcd12864液晶屏，有点复杂，只有基本的显示。#include #include #define uintunsigned int#define uchar unsigned char***it LCD12864
2021-11-19 06:57
MSP f149 液晶12864 串口显示 分享
2015-06-23 12:30
[code]#include #include #include#define uchar unsigned char#define uint unsigned intvoid delay(uchar x);void wrcom(uchar);void wrdata(uchar );***it rs=0xb0^7;//0xb0是P3的字节地址，这样可少按一次shift键。***it wr=0xb0^6;***it e=0xb0^5;***it cs2=0xb0^4;***it cs1=0xb0^3;***it d=P1^0;//void checkbusy();uchar code datable[24][16]={/*--文字:单--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0x00,0xF8,0x49,0x4A,0x4C,0x48,0xF8,0x48,0x4C,0x4A,0x49,0xF8,0x00,0x00,0x00,0x10,0x10,0x13,0x12,0x12,0x12,0x12,0xFF,0x12,0x12,0x12,0x12,0x13,0x10,0x10,0x00,/*--文字:片--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0x00,0x00,0xFE,0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x00,0x00,0x00,0x80,0x60,0x1F,0x02,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x00,/*--文字:机--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x10,0x10,0xD0,0xFF,0x90,0x10,0x00,0xFE,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x04,0x03,0x00,0xFF,0x00,0x83,0x60,0x1F,0x00,0x00,0x00,0x3F,0x40,0x40,0x78,0x00,/*--文字:学--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00,0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00,/*--文字:习--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0x02,0x02,0x02,0x12,0x22,0xC2,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x08,0x18,0x08,0x04,0x04,0x04,0x02,0x02,0x41,0x81,0x40,0x3F,0x00,0x00,0x00,/*--文字:，--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,/*--文字:真--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0x04,0x04,0xF4,0x54,0x54,0x54,0x5F,0x54,0x54,0x54,0xF4,0x04,0x04,0x00,0x00,0x10,0x10,0x90,0x5F,0x35,0x15,0x15,0x15,0x15,0x15,0x35,0x5F,0x90,0x10,0x10,0x00,/*--文字:的--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0xF8,0x0C,0x0B,0x08,0x08,0xF8,0x40,0x30,0x8F,0x08,0x08,0x08,0xF8,0x00,0x00,0x00,0x7F,0x21,0x21,0x21,0x21,0x7F,0x00,0x00,0x00,0x43,0x80,0x40,0x3F,0x00,0x00,/*--文字:有--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x04,0x04,0x04,0x84,0xE4,0x3C,0x27,0x24,0x24,0x24,0x24,0xE4,0x04,0x04,0x04,0x00,0x04,0x02,0x01,0x00,0xFF,0x09,0x09,0x09,0x09,0x49,0x89,0x7F,0x00,0x00,0x00,0x00,/*--文字:点--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0x00,0xC0,0x40,0x40,0x40,0x7F,0x48,0x48,0x48,0x48,0xC8,0x08,0x08,0x00,0x00,0x80,0x40,0x37,0x04,0x04,0x14,0x64,0x04,0x14,0x64,0x04,0x07,0x10,0xE0,0x00,0x00,/*--文字:难--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x04,0x24,0xC4,0x04,0xE4,0x5C,0x20,0xF8,0x4F,0x48,0x49,0xFA,0x48,0x48,0x08,0x00,0x20,0x10,0x0C,0x03,0x04,0x18,0x00,0xFF,0x22,0x22,0x22,0x3F,0x22,0x22,0x20,0x00,/*--文字:！--*//*--宋体12;此字体下对应的点阵为：宽x高=16x16--*/0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}; void delay(uchar x) { uchar a=100; while(x--) while(a--); }/* void checkbusy() {uchar a;// P2=0xff;wr=1; rs=0;e=1;while(1){//d=0;e=0;a=P2;while(!(a&0x80))break;d=0;e=1;//P1=0;} }*/void wrcom( uchar com) {// checkbusy();//加忙检测后，数据正常无显示，没搞懂。 rs=0; wr=0; e=1; P2=com; _nop_(); e=0; }void wrdata(uchar data0) {//checkbusy(); rs=1; wr=0; e=1; P2=data0; delay(1); e=0; } void main(){ uchar i,j; wrcom(0x0c); wrcom(0x30); wrcom(0x01); wrcom(0x06); while(1) { cs1=0;//左屏显示第一、第二、第三、第四（第一行）和第七、第八、第九、第十（第二行）八个字。cs2=1; wrcom(0xb8); //左屏第一行第一页 for(i=0;i
2021-08-26 16:46
