ADFM BITSIN ADCON寄存器的使用是什么？1 =右对齐。当转换结果被加载时，六个最有效位的ADRESH设置为“0”。0＝左对齐。六个最低有效位的ADRESL设置为“
2019-01-02 16:52
ADCONDOWS.GO是1或0？void Read_ADC(uchar num,uint16*.){.(num>0){ADCON0bits.GO=1；//Sta
2020-04-29 12:22
)ADCON2=0b10101011；//正确判断结果//12TAD，在(1){ADCON0bits.GO=1；//Start Conversion).(ADCON0bits.
2019-09-12 09:47
(){ // Start the conversion ADCON0bits.GO = 1;}bool ADC_IsConversionDone(){ // Start the conversion
2018-09-10 15:37
this and trisio need to be set) // Start A/D conversion process ADCON0bits.GO = 1; while
2019-07-12 15:52
小弟刚刚接触PIC单片机，AD部分ADCON0寄存器中GO/DONE位在程序中要怎么定义？小弟用的是PIC16F685单片机，用ADGO定义不对，希望大神帮帮忙，谢谢
2014-10-15 18:19
.CHS=0; // Select channel 0ADCON0bits.ADON=1; // enable ADC int myresult;char mytxt;ADCON0bits.GO = 1
2019-07-23 13:27
){ ADCON0bits.GO =1; // start conversion while (ADCON0bits.GO);// wait for conversion to finish return
2019-07-29 16:11
；//将adc连接到VSS_._us(50)；ADCON0bits.GO_nDONE=1；//Start conv通过设置GOandDone变量.(ADCON0bits.GO_nDONE){}//等待转换结束ADC=
2019-05-23 12:24
; // Turn on the ADC module ADCON0bits.ADON = 1; // Start the conversion ADCON0bits.GO_nDONE = 1; // Wait
2021-07-30 13:25
