void Time_init(void)//定时器初始化{TMOD = 0x01;//设置定时器0 1 均为工作方式1TH0 = (65536 - 50000) / 256;//设置定时器0为
2015-04-27 20:44
voidApp_OS_IdleTaskHook (void){u8 key;static int num;KEY_Init();num++;if(num%50000==0){ printf
2020-04-24 03:43
;TH0=(65535-50000)/256;TL0=(65535-50000)%256;EA=1;EX0=1;TR0=1;}void main(){ P1=0x01;t0=P1;while(1
2014-10-15 18:56
,0xB6,0xBE,0xE0, 0xFE,0xF6,0xEE,0xFE, 0x9C,0xFC,0x8E };void delay(uint);void main(){ TMOD=0x01;//设置定时器0为工作方式1 TH0
2013-03-09 15:17
(PC6);// DDRA|=BIT(2);//PORTA|=BIT(2);DDRB=0XFF;while(1){PORTC|=BIT(6); i=50000; while(i--); i=50000
2013-09-23 17:32
#include#include***it P2_7=P2^7;void main(){ TMOD=0x51; TH0=(65536-50000)/256; TL0=(65536-50000
2013-11-20 21:31
unsigned int u16;typedef unsigned char u8;***it led=P2^0; void Timer0Init(){TMOD=0X01;TH0=(65536-50000
2017-10-04 22:56
;***it led2=P1^7;uint num=0,num1=0;void main(){TMOD=0x11;TH0=(65636-50000)/256; TL0=(65636-50000)%256
2014-11-24 13:54
;tt=0;TMOD=0x01; //设置定时器0为工作方式1TH0=(65535-50000)/256;// "/"是求模运算 即能被几个整除TL0=(65535-50000
2017-02-02 11:35
,0x71};void delay(uint z);void main(){num=0;tt=0;TMOD=0x01;//设置定时器0为工作方式1（每个定时器都有四种工作方式）TH0=(65536-50000)/25
2017-03-24 22:38
